-
Forum
-
etracer official forum
-
Bug report and trouble shooting
-
PDF Reports 2.1.6 Alpha ver.
PDF Reports 2.1.6 Alpha ver.
Less
More
-
Posts: 11
-
Thank you received: 1
-
-
-
-
5 years 11 months ago #49
by olddog828
Having trouble saving PDF reports. See attached file and you will see that the curves are not being generated. Also found that if I change to a different tube config file the PDF report will not be generated at all until I clean the windows registry.
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 32
-
Thank you received: 7
-
-
Less
More
-
Posts: 11
-
Thank you received: 1
-
-
-
-
5 years 11 months ago #56
by olddog828
Also use 2.0.3 and that has no issues with creating PDF at all. Can create the report from the menu or have it auto made when doing a Combo test run.
With the alpha version, when i try to auto create a PDF when doing the Combo tests, the .cvs and .txt files are created ok, but the PDF does not and freezes the program.Also in the alpha if I do not have the curves on the screen, the pdf created will not show them only the quick test and corner results are displayed
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 32
-
Thank you received: 7
-
-
5 years 10 months ago #58
by admin
Please test the latest software release, version 2.1.8 alpha and let me know how it works. Please note the plot in the PDF report should only contain full-scan traces.
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 11
-
Thank you received: 1
-
-
-
-
-
Forum
-
etracer official forum
-
Bug report and trouble shooting
-
PDF Reports 2.1.6 Alpha ver.
Time to create page: 0.041 seconds
